Cuda top load parts washers are the right choice for most shops. Parts are placed on a turntable that rotates while being blasted with a high temperature, high pressure water and soap spray. After 15-20 minutes of automatic cleaning, parts come out looking like new again.
There are 4 Series of Cuda Top Load parts washers, each series has a variety of models and options so Master Burn can create the perfect washer for your shop.
Cuda Top Load Parts Washer Models:
|Series||Load Capacity||Turntable Diameter||Working Height||GPM||PSI|
|2216||500 lbs.||22 in.||16 in.||28 GPM||30 PSI|
|2412||250 lbs.||24 in.||12 in.||20 GPM||22 PSI|
|2518||500 lbs.||25 in.||18 in.||50 GPM||45 PSI|
The Cuda SJ-15 Basket System is Different
The Cuda SJ-15 uses a stationary basket system with rotating spray nozzles. With a total of 23 spray nozzles, the rotating spray arm is never further than 18 inches away from the load and creates a unique surround cleaning effect.
|Series||Load Capacity||Basket Length x Width||Working Height||GPM||PSI|
|SJ-15||350 lbs.||32 in. x 21 in.||21 in.||37 GPM||30 PSI|